Changing The Delay Time And Number Of Shots - Canon Powershot SD890 IS DIGITAL ELPH User Manual

2
Shoot.
• When you press the shutter button fully, the self-timer lamp will
blink.*
* When [Red-Eye Lamp] is set to [On] in [Flash Settings] in the Rec. menu, the
self-timer lamp will light 2 seconds before the flash fires (p. 80).
To Cancel the Self-Timer:
Press the button and the

Changing the Delay Time and Number of Shots (

1
Select [Self-timer].
1. Press the
2. In the
button to select [Self-timer].
3. Press the
2
Make settings.
1. Use the
[Delay] or [Shots] and the
button to change the settings.
2. Press the
3. Press the
If the [Shots] option is set to 2 or more shots, the following
occurs.
- The exposure and white balance are locked at the settings
selected for the first shot.
- If the flash is used, the interval between shots lengthens.
- The interval between shots may lengthen when the built-in
memory of the camera fills.
- Shooting will automatically cease if the memory card
becomes full.
or
button.
menu, use the
button.
or button to select
button.
button.
button to select
or
or
69
.
)