Canon Powershot SD890 IS DIGITAL ELPH User Manual page 198

196
Subject in recorded image is too bright, or image
flashes white.
Subject is too close,
making the flash too
strong.
The subject is
overexposed because the
surroundings are too dark.
Too much light is shining
directly into the camera, or
is being reflected off the
subject.
Flash is set to
on).
Image contains noise.
ISO speed is too high.
White dots appear on the image.
Light from the flash has
reflected off dust particles
or insects in the air. This is
particularly noticeable
when shooting using the
wide angle.
Shoot within correct flash range of the
subject when using the built-in flash
(p. 219).
Set the exposure compensation to a
negative (–) setting (p. 101).
Use the AE lock or spot metering
function (pp. 99, 102).
Change the shooting angle.
(Flash Set the flash to
Higher ISO speeds and
Auto) setting may increase image
noise. For higher image quality, use
as low an ISO speed as possible
(p. 74).
In
mode, the ISO speed increases and
noise can appear.
This is a phenomenon that occurs
with digital cameras and does not
constitute a malfunction.
(Flash off) (p. 66).
, , , ,
(High ISO
, and