174
Configuring the Camera
Power Saving Function
This camera is equipped with a power saving function, which can
automatically turn off the power or LCD monitor.
Auto Power Down When set to [On], the power will shut off in the following
Display Off
1
Select [Power Saving].
1. Press the
2. Use the
menu.
3. Use the
[Power Saving].
4. Press the
2
Make settings.
1. Use the
option.
2. Use the
settings.
3. Press the
circumstances. Press the power button again to restore
power.
Shooting mode: Approximately 3 minutes after the last
control is accessed on the camera
Playback mode or when connected to a printer:
Approximately 5 minutes after the last control is
accessed on the camera.
In shooting mode, the LCD monitor automatically turns
off after the selected time if no control is accessed,
regardless of the [Auto Power Down] setting. Press any
button other than the power button or change the
camera orientation to turn the LCD monitor back on.
button.
or
button to select the
or
button to select
button.
or
button to select an
or
button to make
button.