Canon Powershot SD890 IS DIGITAL ELPH User Manual page 194

192
When the power is turned on
"Card locked!" message appears.
The SD memory card's or
SDHC memory card's
write protect tab is set to
"Write protect".
The Date/Time menu appears.
The built-in rechargeable
lithium battery charge is
low.
LCD monitor
Nothing displays.
The LCD monitor is set
not to display.
[Power Saving] is set to
[Display Off].
The LCD monitor will shut off during shooting.
If [Power Saving] is set to [Display Off], the power saving function
will shut down the LCD monitor while shooting in
Camera screen is black at start-up.
Incompatible image has
been selected as the
startup image in the My
Camera settings.
When recording to, erasing from or
formatting the memory card, slide the
write protect tab upward (p. 212).
Recharge the built-in battery
immediately (p. 15).
Press the DISP. button to turn on the
LCD monitor (p. 60).
Press any button other than the power
button or change the camera
orientation to turn the LCD monitor
back on (p. 174).
Change the start-up image in the My
Camera settings (p. 188) or use the
supplied software program
ZoomBrowser EX or ImageBrowser to
restore the default settings. See
ZoomBrowser EX/ ImageBrowser
Software User Guide (PDF).
mode.