Editing - Canon Powershot SD940 IS Digital Elph User Manual

Editing

You can trim the beginnings and ends of recorded movies in one-second
increments.
Movie Editing Panel
Movie Editing Bar
Choose *.
Follow Steps 1 – 3 on p. 33, choose *
●
and press the m button.
The movie editing panel and the movie
editing bar will appear.
Set the editing range.
Press the op buttons and choose
●
.
Press the qr buttons to move
●
display at each one-second interval. If you
choose , you can trim the beginning of
the movie from
can trim the end of the movie from
Even if you move
point, only the portion from the
nearest to the left will be trimmed
when is chosen. Only the portion from
the nearest
when is chosen.
The light blue section indicated with
be the section of the movie that remains
after editing.
Check the edited movie.
Press the op buttons to choose
●
(Play), then press the m button. The
edited movie will play.
●
To edit the movie again, repeat Step 2.
To cancel editing, press the op buttons,
●
and choose
button, press the qr buttons to choose
[OK], and press the m button again.
. If you choose
to a point other than a
to the right will be trimmed
. After pressing the m
or
. will
, you
.
will
101