Changing The Image Quality - Canon Powershot SD940 IS Digital Elph User Manual

Changing the Image Quality

You can choose between three image quality settings.
Image Quality Table
Image Quality
(Recording Pixels/Frame Rate)
1280 x 720 pixels, 30 frames/sec. For shooting high-definition movies.
640 x 480 pixels, 30 frames/sec.
320 x 240 pixels, 30 frames/sec.
Estimated Shooting Time
Image Quality
(Frame Rate)
• Based on Canon's testing standards.
• Maximum clip length is approximately 10 minutes in
Recording also stops when the file size reaches 4 GB.
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.
Choose the image quality.
Press the m button, then use the op
●
buttons to choose
button again.
Choose an option.
Press the op buttons to choose an
●
option, and press the m button.
The setting will display on the screen.
For shooting standard quality movies.
Since the number of recording pixels is smaller,
the image quality will be lower than with
but you can record three times the length.
Shooting Time
2 GB
10 min. 53 sec.
23 min. 49 sec.
1 hr. 13 min. 10 sec.
, then press the m
Content
8 GB
43 min. 32 sec.
1 hr. 35 min. 11 sec.
4 hrs. 52 min. 24 sec.
, 1 hour in and
,
.
97