Loading Images With Plug-In Compliant Application Programs (Adobe Photodeluxe, Photoshop, Etc.) - Canon Powershot S10 Software Starter Manual

Loading Images with Plug-In Compliant
Application Programs
This section explains how to load images with Plug-In compliant application programs.
Please read the manual for each application program for detailed instructions.
This example uses Adobe PhotoDeluxe to illustrate typical procedures.
Installing the Plug-In Module
1.
Open the [PowerShot Folder] and [Plug-In Folder].
2.
Copy the [Canon PowerShot] file to the [Acquire/Export] folder, which can be
found by opening the [Adobe PhotoDeluxe] and [Plug-ins] folders.
Starting the Software
If PowerShot Browser has been installed, it will start automatically when the camera is
connected to the computer via a USB port. To stop PowerShot Browser from starting
automatically, turn off the automatic start function using the procedures described in
the USB Interface topic on page 46.
1.
Connect the camera to the conputer.
• Connecting to a USB Port (
• Connecting to a Serial Port (
• Connecting via a CF Card Reader or PC Card Slot (
2.
Turn the camera's mode dial to the
For USB Interface Users
• PowerShot Browser may automatically start when you connect the camera to the
computer. Since you will be using the plug-in compliant application to load
images, you should close PowerShot Browser.
• To prevent PowerShot Browser from automatically starting, see the procedures on
page 46.
For Serial Interface users
• If you are connected to an AppleTalk network via the printer or modem port,
choose the
3.
Start Adobe PhotoDeluxe.
1. Click the [Get Photo] button at the upper left of the window.
2. Click [Get Photo] from the tab that displays and select [Cameras].
3. In the [Select Input Source] dialog, select [Canon PowerShot] and click the [OK] button.
• This step is not required from the second time onward.
4. Click the [Camera] icon.
• The Plug-In Module will start.
5. Click the
USB Interface
Confirm that the [USB Port] and either [PowerShot S10] or [PowerShot S20]
have been selected and click the [Set] button.
p. 41)
p. 43)
(Apple) menu, select [Chooser] and set AppleTalk to [Inactive].
icon and set the communication settings.
p. 44)
position.
55