From Loading To Printing - Canon Powershot S10 Software Starter Manual

From Loading to Printing

This section provides a simple explanation of the procedures for using PowerShot Browser
to load and print images. Please refer to the PowerShot Browser Help file for more details.
Auto Save and Batteries
When the camera is connected to a computer and powered by a 2CR5 lithium
battery or Battery Pack NB-5H, a message will ask if you wish to remain connected
after approximately five minutes without a camera control being accessed. If you
select [No], the camera will shut down after approximately one minute (PC icon
disappears from the display panel). You can restore the connection by pressing
the shutter button (PC icon displays in the display panel).
Starting PowerShot Browser
1.
Open a connection between the camera and computer.
• Connecting to a USB Port (
• Connecting to a Serial Port (
• Connecting via a CF Card Reader or PC Card Slot (
2.
Turn the camera's mode dial to the
For Serial Interface Users
• If you are connected to an AppleTalk network via the printer or modem port,
choose the
3.
Start PowerShot Browser.
• Double-click the [Canon PowerShot] icon on the desktop.
• If the Canon PowerShot icon does not appear on the desktop, look in the folder
in which you installed the programs and double-click [PowerShot Folder],
[PowerShot Browser Folder] and the [PowerShot Browser] icon.
p. 41)
p. 43)
(Apple) menu, select [Chooser] and set AppleTalk to [Inactive].
Canon PowerShot Icon
p. 44)
position.
45