Setting The Display Overlays - Canon Powershot A650 IS User Manual

122
Various Shooting Methods
3
Press the
To Cancel the Shortcut Button
Select in Step 2.
Using the
1
Press the
• For or
settings are switched.
• For , the corresponding setup screen is displayed.
• Each press of the
with the
point, ensure that the white paper or cloth is positioned so it
appears at the center of the LCD monitor and then press the
button. After using this function once, the white balance
setting changes to the
• For , pressing the
The display turns on again with any button operation.
Depending on the shooting mode or settings, this function may
not be available even if the

Setting the Display Overlays

Shooting Mode
You can display vertical and horizontal grid lines, a 3:2 print area
guide, or both on the LCD monitor while shooting to help check the
position of your subject.
Off —
Displays grid lines to divide the screen into 9 parts. Helps
Grid Lines
confirm the vertical and horizontal positioning of the subject.
Helps confirm the print area for a 3:2 print.*
3:2 Guide
Areas outside the printable area are grayed out.
Displays both the grid lines and the 3:2 guide
Both
simultaneously.
*2 Images are still recorded at the standard aspect ratio of 4:3.
button.
Button
button.
, each time that the
button records the white balance data
option. Since the frame does not appear at this
setting.
button turns off the LCD monitor.
See Functions Available in Each Shooting Mode (p. 214).
button is pressed, the
button is pressed.
*1 Only [Grid Lines] can be set.
2