Connecting To A Tv; Shooting/Playback Using A Tv - Canon Powershot A650 IS User Manual

Connecting to a TV

Shooting/Playback Using a TV

You can use the supplied AV cable to shoot or playback images using a TV.
1
Turn off the camera and the TV.
2
Connect the AV cable to
the camera's A/V OUT ter-
minal.
• Open the terminal cover by slipping
a fingernail under the left edge and
plug the AV cable in all the way.
3
Plug the other ends of the
AV cable to the VIDEO IN
and AUDIO IN jacks on the
TV.
4
Turn on the TV and switch it to video mode.
5
Turn on the camera.
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 47). The
default setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
If the video system is set incorrectly, the camera output may
not display properly.
Connecting to a TV
VIDEO
AUDIO
Yellow
Black
157