Installation And Setup - Geotab GARMIN Bundle Quick Start Manual

Installation and Setup

See the Important Safety and Product Information guide in the product box for product warnings
and other important informatio​
For important warnings regarding the lithium-ion battery and magnets used in the GARMIN fleet
790 tablet, Please refer to the GARMIN Owner's Manual: ​
1
Ensure that the tablet is on the lastest firmware (FW: 5.00 or
higher)
Connect to Wi-Fi and update the firmware on the tablet:
a. From the top of the tablet, swipe down to access the
Android Quick Settings panel.
b. Tap the downward arrow next to the word "Wi-Fi".
c. Locate your Wi-Fi network and enter the password to
connect (password may not be required depending on
network set-up).
d. Once connected, tap the ​ H
e. On the Home screen, tap ​ S
f. Scroll down and tap ​ A bout
g. Tap ​ S ystem
h. Tap ​ D ownload
Software and map updates can only be installed when
connected to WiFi.
2
Plug the vehicle power cable into the magnetic mount.
3
Press the suction cup to the mount until it snaps into place.
NOTE:​ Step may not be required if mount and suction cup
are already assembled.
Copyright © Geotab Inc. 2017 - All Rights Reserved | www.geotab.com | Rev 1.4 - 04/2018
Geotab and IOX are registered trademarks of Geotab Inc.
The Bluetooth​ word mark is a registered trademark owned by the Bluetooth SIG, Inc.
®​
GARMIN​ and GARMIN fleet​
®​
n .
ome​ button.
ettings​
device​
updates​ .
a nd wait for the updates to complete.
​
™ ​
790 are trademarks of GARMIN SWITZERLAND GMBH CORPORATION
g oo.gl/2o7yoy​
. ​ ( gear icon).
​
.
.
3