Geotab GO9+ Manual

In the box:
G9-SAM-PLE-1234 G9-SAM-PLE-1234
GO9-AAAAAA GO9-AAAAAA
G9-SAM-PLE-1234 G9-SAM-PLE-1234
GO9-AAAAAA GO9-AAAAAA
6
How to Set Up the GO9+
Wi-Fi Hotspot
Note: To connect to your WiFi hotspot, the device
MUST finish provisioning (all LEDs should
turn solid) and your vehicle ignition must
be on
Please ensure your device is connected and
communicating, then follow the steps below to
enable and connect to the Wi-Fi hotspot:
1) In MyGeotab, navigate to Vehicles in the main
menu.
Name, VIN, or serial num Show Sort by: Name Add More
Vehicles
1 Vehicle
Test Vehicle
Company group
G9XXXXXXXXXX
332692 km
ABCDEF1234567890
2) On the Vehicles page, select the desired vehicle
from the list.
3) On the Vehicle Edit page, select the Wi-Fi
7
4) Under the Wi-Fi tab, toggle the
toggle to On.
Save Remove Cancel View on map More details
Vehicle Edit Test Vehicle
?
Device Driver feedback Groups Service plan Wi-Fi
HOTSPOT SETTINGS
Enable hotspot
On Off
SSID:
Passwords:
Report
Confirm password:
Columns
5) In the SSID field, enter a unique SSID. The
information entered in this field indicates the
Wi-Fi network name.
6) In the Password field, enter a unique password
for the Wi-Fi network.
7) Click the Save button to save your changes.
tab.
8) On the desired mobile device, navigate to device
settings then select the desired Wi-Fi network
and enter the password.
Note: The Wi-Fi network name and password
are the same as the information entered in
Steps 5 and 6.
8
Rev 0.5 - 06/2020 - PAC-INSUNI205
Telematics Device Quick Start
Read before installing: gtb.page.link/yXpm
Enable hotspot
Personal Mode
77mm
1
53mm
27mm