1 - 2
1.5
Text emphasis
DANGER
WARNING
CAUTION
NOTICE
NOTE
1.6
Explanation of abbreviations
Abbreviation Explanation
SI
SIE
SIM
PM
PMP
PMA
PMF
Q
QIQ
QSQ
SW
The work steps in this document that are identified by these abbreviations should be
checked off in the Maintenance Protocol (SPB7-420.832.20...).
MammoReport Plus
DANGER indicates when there is an immediate danger that leads
to death or serious physical injury.
WARNING indicates a risk of danger that may lead to death or to
serious physical injury.
CAUTION used with the safety alert symbol indicates a risk of
danger that leads to slight or moderate physical injury and/or
damage to property.
NOTICE used without the safety alert symbol indicates a risk of
danger that if disregarded leads or may lead to a potential situa-
tion which may result in an undesirable result or state other than
death, physical injury or damage to property.
NOTE contains information provided with special emphasis to
facilitate proper use of the equipment or proper execution of a
procedure, i.e. hints, tips.
Safety Inspection
Safety Inspection Electrical Safety
Safety Inspection Mechanical Safety
Preventive Maintenance
Preventive Maintenance, Preventive Parts Exchange, External Inspec-
tion, etc.
Preventive Maintenance Adjustments
Preventive Maintenance Function, Operating Value Check
Quality Check
Quality Check Image
Quality Check System
Software Maintenance
Register 8
SPB7-420.831.20
Rev. 01
General information
Page 2 of 2
01/05
CSPS 24
Siemens Medical Solutions
Erlangen, Germany