Page 2
XTBA Analogue Merge is a 1U 19" rack unit that will merge up to 24 channels of 0 to +10 volt analogue control and a DMX data stream into a single DMX512 output signal. The XTBA Smart Merge A-D will allow older analogue equipment and custom-built controllers to be added into any DMX512 installation.
Page 3
19” RACK MOUNTING The rack version of the XTBA Smart Splitter is provided with a pair of ‘ears’ for fitting into a 19” rack frame. The ears are fitted to the unit by removing the two screws on either side at the front of the unit. The stick on rubber feet (used when the unit is free standing) will need to be removed from the underside of the unit.