Page 2
The XTBA Smart Merge 2 will multiplex two DMX512 input signals to two DMX512outputs. Each dimmer channel from the two input signals is compared and the higher channel level will be outputted. The second DMX inputs start address may be altered by setting the offset address on the three front panel code switches.
Page 3
19” RACK MOUNTING The rack version of the XTBA Smart Merge 2 is provided with a pair of ‘ears’ for fitting into a 19” rack frame. The ears are fitted to the unit by removing the two screws on either side at the front of the unit. The stick on rubber feet (used when the unit is free standing) will need to be removed from the underside of the unit.