Advertisement
19" RACK MOUNTING
The rack version of the XTBA Smart Splitter is provided with a pair of 'ears' for
fitting into a 19" rack frame. The ears are fitted to the unit by removing the two
screws on either side at the front of the unit. The stick on rubber feet (used when
the unit is free standing) will need to be removed from the underside of the unit.
Technical Specifications 19" Rack
Dimensions
Weight
Power
Data
Pin Configuration
General Information
This product may only be used for controlling dimmers and moving lights. It
must not be used in DMX512 applications for stage machinery or
pyrotechnics. Using the product out of these specifications will remove all
responsibility from the supplier.
CE Declaration of conformity
XTBA declares that this equipment meets the requirements of the EMC Directive
89/366/EEC.
Product #02064 - 11/07/2011
230/265mm inc.front handles x 430mm x 32mm
4.0 Kg
190/250V AC Nominal 2A 240V AC
DMX512 1986/1990
Pin 1 Common, Pin 2 minus data, Pin 3 plus data.
WEE/FC2753ZS
XTBA Analogue Merge Manual Page 3 of 3
© XTBA 1986 – 2012
Advertisement
