Setting Up And Installation - Candy Holiday 182 User Instructions

CHAPTER 5
SETTING UP INSTALLATION
After taking the machine out of its packing, proceed as
follows:
Work on the back side of the machine.
1) Unscrew the central rod A, the 2 side screws C and remove
the bar D and the relevant spacer.
2) Unscrew the two rods B and remove them. Two spacers will
fall inside the machine.
3) By tilting the machine, remove the above mentioned
spacers.
4) Stop the holes using the plugs that you will find inside the
bag containing the instruction booklet.
WARNING:
DO NOT LEAVE THE PACKAGING IN THE REACH
OF CHILDREN AS IT IS A POTENTIAL SOURCE
OF DANGER.
EN
C A C D
B
B
33