Table of Contents
Advertisement
Mechanism
case
1 Remove 2 screws mounting the body B.
2 Turn the feed hose clockwise slightly to remove pawls, and remove the feed
hose.
3 Open the inner lid, and remove the air supply hose by removing pawls of the
air supply hose.
4 Slide the body B frontward after pulling up rear portion of the body B slightly.
(Front portion of the Body B shall be holded.)
5 Set the body B against wall.
6 Remove 8 screws and 1 pawl mounting the outer tub cover to remove.
7 Remove the flapper.
* Do not remove mounting screw completely, hold the screw of the
flapper and pulling out.
* Incase to pull out the flapper from the tub,
Remove 2 detergent inlet (Blue pocket) from the tub, so that the flapper
shall be throughed at groove on the balancer.
13
Hide quick links:
Advertisement
Table of Contents
