Setting the Camera to the Color Swap Mode
This mode allows you to transform a color specified in the
LCD monitor into another.
Original Color
(Before Swapping)
1
(Color Swap)
See Menus and Settings (p. 22).
The camera will switch to
color input mode and the
display will alternate
between the original image
and the color swap image
(using the previously set
color).
2
Aim the camera so that the original
color appears at the center of the LCD
monitor and press the
Only one color can be specified.
You can use the
of colors that are swapped.
-5 : Only takes the color that you want to swap.
+5 : Also takes colors close to the one that you want
to swap.
Desired Color
(After Swapping)
MENU button.
button.
or
button to specify the range
53