Canon Powershot A410 Advanced User's Manual page 40

1
FUNC. Menu
*Default setting.
Use the
movie mode and press the
FUNC./SET button.
In
ors) mode, you can change the
resolution/frame rate (p. 29).
2
Shoot.
Pressing the shutter button halfway automatically sets the
exposure, focus and white balance settings.
Pressing the shutter button fully starts recording video.
During shooting the recording time (in seconds) and a red
circle appear on the LCD monitor.
Pressing the shutter button fully again stops recording.
Recording will stop automatically under the following cir-
cumstances.
- When the maximum recording time elapses
- When the internal memory and the memory card becomes
full
You are recommended to use a memory card that has
been formatted in your camera to shoot movies (p. 21).
The card supplied with the camera may be used without
further formatting.
The focus and zoom settings remain fixed for subsequent
frames at the values selected for the first frame.
Before recording, you can set the white balance (p. 45).
QuickTime 3.0 or later is required to play back movies
(Data type: AVI/Compression method: Motion JPEG) on a
computer. QuickTime (for Windows) is included on the
Canon Digital Camera Solution Disk. On the Macintosh
platform, this program is standard with Mac OS X or later.
38
* (Movie).
See Menus and Settings (p. 22).
or button to select a
(Standard) or (My Col-