Perforated Roll Paper; Windows Advanced Features Using Pocketjet 3 Utility (Confi Guration Utility) - Brother PocketJet PJ-523 User Manual

3. If the fi xed length desired is not one of these sizes, use the Advanced Features
setup as explained in #2 above to select User Defi ned Paper Size. Set the width
and length as desired.
D. Multipage Documents with "tear off" for EACH page
Note: This feature has recently been added to the Windows Vista / XP / 2000
Professional driver.
Select "Roll Paper Pause" for Windows Vista / XP / 2000 Professional for Paper Source
on the "Paper" tab within the printer properties control panel. This setting causes a
dialog to be displayed before EVERY printed page, including the fi rst one.

Perforated Roll Paper

1. Select "End of Page" mode.
2. Select "Perf Letter" or "Perf A4" paper size. This is very important because
the printable area is smaller when using perforated paper compared to cut
sheet paper.
Windows Vista / XP / 2000 Professional Note: Set "Paper Type" to "Perforated
Roll." This modifi es the printable area for any paper size including custom
sizes. This way you are not limited to "Perfl etter" and "PerfA4" sizes.
Windows Advanced Features Using
PocketJet 3 Utility (Confi guration Utility)
Auto-On
Auto-Off
Pre-feed
These features can be accessed through Windows by using the PocketJet 3 Utility
(Confi guration Utility). Please see specifi c defi nitions of Auto-On, Auto-Off, and Pre-
feed on pages 22 and 23.
Page 10