For Mac Os Users; Selecting Paper Type; Cut Sheet Paper; Non-Perforated Roll Paper - Brother PocketJet PJ-622 User Manual

®
 Windows 7
a
Start button - [Devices and
Printers].
b
Select [Brother PJ-XXX], and then
click [Print server properties].
c
Click the [Forms] tab, and then click
[Change Form Settings]. If the
[User Account Control] dialog
displayed, enter the password and
click [Yes].
d
Configure the desired paper size,
etc., and add the paper size.
®
For Mac OS Users
a
If the desired paper size has not been
defined, open the [Page Setup] dialog
and select [Paper size] - [Manage
Custom Sizes...]. The custom paper
size window is displayed.
b
Configure the desired paper size, etc.,
and add the paper size.

Selecting Paper Type

Paper type can be set to [Cut Sheet], [Roll],
[Perforated Roll] or [Perforated Roll
Retract].

Cut Sheet Paper

When using cut sheet paper, configure the
printer driver as described below.
a
Select the appropriate paper size
(Letter, A4, or Legal).
b
®
Windows
[Cut Sheet].
c
Set [Form Feed Mode] to [Fixed Page].
2

Non-Perforated Roll Paper

When using non-perforated roll paper,
configure the printer driver as described
below, depending on the desired length of
each page.
Variable-Length Pages (Saves Paper)
In this case, the paper size that is selected
determines the maximum number of lines per
page.
a
Select the appropriate paper size.
®
Windows
®
Mac OS :US Letter (Roll), A4 (Roll), or
US Legal (Roll)
b
®
Windows
[Roll].
c
Set [Form Feed Mode] to [No Feed].
d
Set [No Feed Mode Extra Feed] to the
desired setting. Paper is ejected after
the last page of the document according
to the setting.
Using the Printer
only, set [Paper Type] to
:Letter, A4, or Legal
only, set [Paper Type] to
2
2
2
2
2
23