Canon DIGITAL IXUS V3 User Manual page 98

Direct Interface
Cable (DIF-200)
Align the symbols on
the camera and cable to
connect them.
This shows when a
direct print function
compatible printer is
connected.
Connecting to a Bubble Jet Printer
• Please read the Quick Start Guide supplied with your BJ
printer to see if it is compatible with the camera's direct print
function, and for instructions regarding the connection cables
and the printer's general operation.
Shut the camera's
power off (p. 26).
• Attach the direct interface cable to the
printer.
• Open the terminal cover on the camera
and insert the cable's connector into
the camera's DIGITAL • A / V OUT
terminal. Orient the cable so that the
connector's symbol faces the
camera's front panel.
• Press the printer's ON/OFF button to
turn on its power. (If you are using Card
Photo Printer CP-10, the printer's power
will turn on in Step 2 when printer and
power cable are connected.)
• Set the mode switch to the
and turn on the camera's power.
• will display when the printer is
correctly connected.
Printing 95
position