Using the LCD Monitor
The LCD monitor can be used to compose images while shooting,
adjust settings menus and replay images.
• The image in the LCD monitor will darken in strong sunlight
or bright light. This does not constitute a malfunction.
Shooting Mode
• The LCD monitor setting (On or Off) is saved by the camera
when the power is turned off so that the same setting is
automatically available when the power is turned on again.
However, the setting may be lost when the power has been
turned off after the "Change the battery pack" message has
displayed, while the LCD monitor was on in shooting mode.
• In the
,
regardless of its On/Off setting.
• Set the flash to
the upper indicator blinks orange and the camera shake
warning icon ( ) appears in the LCD monitor after the
metering preparations are complete.
(
or
on the mode switch)
• The LCD monitor turns on or changes
the display mode as follows with each
press of the
Standard (No Information)
Detailed (Information View)
or
mode, the LCD monitor turns on
,
or affix the camera to a tripod when
Basic Functions
button.
▼
▼
Off
29