Information Displayed On The Lcd Monitor - Canon DIGITAL IXUS V3 User Manual

30 Basic Functions
Replay Mode

Information Displayed on the LCD Monitor

Shooting Mode
In shooting mode, information about the current settings and
remaining image capacity will display on the LCD monitor for
approximately six seconds when the actions below are taken,
regardless of whether the LCD monitor is set to On or Off.
• The power is turned on.
• The , ,
• The camera settings are changed.
• The Set up menu is closed.
While this information is displayed, you may set the flash,
continuous mode, self-timer, macro and infinity settings.
• After you press the shutter button and take a shot, the
recorded image appears on the LCD monitor for 2 - 10
seconds (1-second increments). It will continue to display if
you press the
Changing the Review Duration (p. 44) .
• While a recorded image is displayed on the LCD monitor,
you can check the exposure with the graph (see Histogram,
p. 32) that shows the distribution of the brightness data.
(Press the
information is not shown) If the exposure requires
adjustment, set the exposure compensation and reshoot.
( on the mode switch)
• The LCD monitor will turn on when the
mode switch is set to the
• In replay mode, pressing the
button cycles the information view
mode each time the button is pressed.
Single Image Replay (p. 74)
Standard
Multi Image Replay (9 Images) (p. 76)
Standard
/ , / or button (
button while it is shown on the screen. See
button if the histogram and other
position.
Detailed No Display
No Display
mode) is pressed.