Installing Arcsoft Camera Suite; Installing The Card Photo Printer Cp-10 Printer Driver - Canon DIGITAL IXUS 330 Software Starter Manual

4.
Follow the onscreen instructions to proceed with the installation.
• Select your camera model when prompted during the installation.
5.
When the Installer Panel displays again, after the installation is complete,
click [Exit].
• Remove the Canon Digital Camera Solution Disk once the installation is
complete so that the proper driver may be installed.
• Continue with the procedures on page 23 to install the driver software
to allow the camera to be connected to a computer via the USB
interface and download images.

Installing ArcSoft Camera Suite

To install ArcSoft PhotoImpression or VideoImpression, place the ArcSoft Camera
Suite CD-ROM into the drive and double-click the [My Computer] icon on the
desktop followed by the [ArcSoft] folder and [Setup.exe] icon. Follow the on-screen
instructions to install ArcSoft PhotoImpression/VideoImpression.
NOTICE

Installing the Card Photo Printer CP-10 Printer Driver

The driver for Card Photo Printer CP-10 (sold separately) must be installed to print
from a CP-10 connected to the computer.* For installation instructions, please see
the Card Photo Printer CP-10 Printer User Guide contained on the Canon Digital
Camera Solution Disk as a PDF file (p. 5).
* Interface Cable PIF-100 (sold separately) is required to connect the Card Photo Printer
CP-10 to a computer.
The model of camera you purchased will determine whether
or not an image editing program was supplied with your
product as well as the specific program included in the
software bundle. Please refer to the System Map supplied
with your camera for this information.
21