Connecting To A Usb Port - Canon DIGITAL IXUS 330 Software Starter Manual

16

Connecting to a USB Port

Connection Precautions
• Connect the camera directly to a USB port on the computer; not through a hub.
The connection may not operate correctly through a hub.
• The connection may not operate correctly if you are using other USB devices,
excluding USB mice or keyboards, at the same time. If this occurs, disconnect the
other devices from the computer and try reconnecting the camera.
• Do not connect two or more cameras to the same computer via the USB
interface. The connections may not operate correctly.
• Never allow the computer to go into standby (sleep) mode while a
camera is connected via the USB interface. If it does happen, never
disconnect the USB cable. Try to awaken the computer with the camera
in the connected state. Some computers will not awaken properly if you
disconnect the camera while they are in standby mode. Please refer to
your computer manual for instructions regarding its standby mode.
1.
Install the software (first-time connection only)
• Windows users see p. 20.
• Macintosh users see p. 76
2.
Attach the supplied USB cable to the computer's USB port and the
camera's Digital Terminal.
• You do not need to turn off the computer for this procedure.
• Refer to your computer manual for the location of the computer's USB ports.
3.
Prepare the camera for communication with the computer.
• Turn the camera's Mode Dial, Mode Switch or POWER /REPLAY Button to
Please refer to the Camera User Guide bundled with your camera for instruction
on how to attach / detach the cable.
.