Fully Automatic Shooting; Beeper - Canon EOS 50D Instruction Manual

1 Fully Automatic Shooting

AF point
Focus confirmation light
48
Set the Mode Dial to <1>.
1
Aim any AF point over the
2
subject.
All the AF points will operate, and
focus will generally be achieved at
the AF point covering the closest
object.
Aiming the center AF point over the
subject will make focusing easier.
Focus the subject.
3
Press the shutter button halfway, and
the lens focusing ring will rotate to
focus.
The AF point which achieves focus
will briefly flash in red. At the same
time, the beeper will sound and the
focus confirmation light <o> in the
viewfinder will light.
If necessary, the built-in flash will pop-
up automatically.
Take the picture.
4
Press the shutter button completely to
take the picture.
The captured image will be displayed
for about 2 sec. on the LCD monitor.
If the built-in flash has popped up,
you can push it back down with your
fingers.