Press The Button - Canon EOS 300D Software Manual

In step 5 , if you hear long beeps, it means something is wrong with the
printer. To find out what's wrong, do the following:
Press the <] > button to playback an image. Then do step
4
<p>) and step
will then appear on the LCD monitor. To fix the problem, see "Error
Messages" on page 11.
If the camera is connected to the printer and you do not operate it for
approx. 6 minutes, the camera power will turn off automatically. However, if
the auto power off time is longer than 8 minutes, then that setting will take
effect instead.
3
Connect the camera to the printer.
•
Connect the camera to the printer with
the USB cable that came with the
camera to. Refer to the printer's
instruction manual to find out which
port to connect the USB cable to.
•
When connecting the cable plug to the
camera's <œ > terminal, the
cable plug's < ∂ > icon must face the
front side of the camera.
4
Turn on the printer.
5
Turn the camera's power switch to
<1 >.
s
When the printer connection is
confirmed, the beeper will sound
briefly.
6
Press the <] > button.
s
The image will be displayed, and the
<w> icon will appear on the upper
left.
(Print the image) on the next page. An error message
Preparing to Print
2 (Press
3