Canon EOS 1D Software Instruction Manual page 141

4
Click the copied folder.
The images in the folder are
displayed.
Before disconnecting the camera
from the computer, quit EOS
Viewer Utility, set the camera's
power switch to <OFF>, and then
disconnect the dedicated cable.
You cannot display images in the preview window (M-20) or edit RAW images (M-29)
saved on a memory card in the camera directly. Before working images with EOS
Viewer Utility, be sure to download images saved on a memory card to your
computer.
For displaying images saved in a third-party card reader, follow the same procedure
to download the target folder to your computer.
Supported Image Formats
The following images can be displayed in EOS Viewer Utility.
• RAW and JPEG images shot on an EOS DIGITAL series (1D Mark II, 1Ds, 1D, 10D, D60,
D30, DIGITAL REBEL/300D DIGITAL) camera
• TIFF and JPEG images saved in EOS Viewer Utility (M-45)
• DCF-compliant JPEG images
* Images that cannot be displayed appear as a question mark [?].
The images that are processed on your computer after being shot or the images
whose file name is changed may not be displayed properly.
You cannot use the camera while displaying images on the camera.
Images that were shot with the camera held vertically with [Auto rotate] setting to
<ON> are automatically displayed vertically.
If the selected folder contains a large number of images, there may be a short delay
before the images appear.
Downloading Images
M
3
M-17