Using The Wireless Controller - Canon XL 2 Instruction Manual

Using the Wireless Controller

Point it at the camcorder's remote sensor
when you press the buttons.
The camcorder has three remote sensors, two at the
front and one at the back.
Inserting Batteries
The wireless controller operates with two AAA
(R03) batteries.
1. Open the battery cover.
2. Insert the batteries following the + and
– markings.
3. Close the battery cover.
❍ Camcorder and wireless controller are equipped with 2 remote sensor modes (
wireless controller does not work, check if camcorder and wireless controller are set to the same
mode.
❍ When the camcorder cannot be operated with the wireless controller, or when it can only be
operated in very close range, replace the batteries. Make sure to replace both batteries at the
same time.
❍ The wireless controller may not work properly when the remote sensor is subjected to strong light
sources or direct sunlight.
24
95). If the