Canon XL 2 Instruction Manual page 80

Recording with the Interval Timer
Press the start/stop button to start recording.
• Interval recording starts and "INT T." stops flashing.
• When the interval is set to 30 seconds or 1 minute, the camcorders goes into record pause mode during
the recordings. When set to 5 or 10 minutes, the camcorder goes into stop mode during the recordings.
To Pause Interval Recording
Press the start/stop button.
• The camcorder returns to record pause mode and "INT T." starts flashing.
• Press the start/stop button to restart recording.
To Finish Interval Recording
1. Press the start/stop button.
2. Open the menu and select [CAMERA SETUP]. Select [INTERVAL T.], set it to [OFF] and
close the menu.
❍ When you record for a long time (more than 12 hours), we recommend turning off the screen
display by pressing the EVF DISPLAY button.
❍ When the display remains shown on the screen, turn off the camcorder. They will disappear in a
few hours.
❍ The remaining tape display may not appear.
80