Protecting Photos; Copying Photos - Canon Vixia HG20 Instruction Manual

Photos
• Photos will be recorded on the media
selected for recording photos (

Protecting Photos

You can protect photos from accidental
erasure.
Protecting Single Photos
1
Open the photo selection screen.
[ Protect]
FUNC.
[ Protect] appears on the screen.
2
Select ( ) the photo you want to
protect.
3
Press to protect the photo.
appears on the bottom bar and
the photo cannot be deleted. Press
again to remove the protection.
4
Repeat steps 2-3 to protect
additional photos or press
twice to close the menu.
Protecting Photos from the Index Screen
Options
[Individual Photos]
Opens the same screen described in Protecting
Single Photos ( 70). Continue from step 3 of
that procedure to protect the photo.
[Selected Photos]
Protects all the photos selected in advance
(marked with a checkmark). Refer to
Selecting Recordings from the Index Screen
( 43).
70
[Remove All]
33).
Removes the protection from all photos.
FUNC.
Desired option
FUNC.
IMPORTANT
Initializing the recording media (
permanently erase all recordings,
including protected photos.

Copying Photos

You can copy photos only from the hard
disk to the memory card.
Copying a Single Photo
1
Select to view the photos
recorded on the hard disk.
FUNC.
Select the
the zoom lever toward T to return to
single photo view.
2
Select (
copy.
3
Copy the photo to the memory
card.
FUNC.
[Yes]
[ Protect]
[Yes]
tab ( 40) and move
) the photo you want to
[ Copy (
FUNC.
[OK]
33) will
)]