Canon Vixia HG20 Instruction Manual page 115

Printer in use
- The printer is in use. Check the printer status.
Printing error
- Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the printer back on and
reconnect the USB cable. Check the printer status.
- When you are printing using the
Readjust trim settings
- The trimming settings for this photo were lost as a result of changes in the paper-related settings.
NOTES
About Canon PIXMA/SELPHY DS Printers: If the printer's error indicator flashes or an error
message appears on the printer's operation panel, refer to the printer's instruction manual.
• If you cannot solve the problem even after consulting this list and the printer's instruction
manual, contact the closest Canon Service Center (refer to the list included with the
printer).
button, check the print settings.
115