Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ABACO MACHINES ALG50A
Summary of Contents for ABACO MACHINES ALG50A
- Page 1 ABACO MACHINES OPERATION MANUAL ABACO LITTLE GIANT LIFTER AUTOMATIC (ALG50A) ABACO MACHINES (USA) 14508 S. Garfield Ave., Paramount, CA 90723, USA Tel : 310-532-0366 Fax : 310-532-0499 Email : sales@abacomachines.com Website : www.abacomachines.com...
- Page 3 OPERATION MANUAL APPLICABLE MODEL of this LITTLE GIANT LIFTER AUTOMATIC: ALG50A...
-
Page 4: Table Of Contents
INDEX Item Pages Overview..............1 echnical Specifications..........1 1) Dimensions............2 2) Spare part list............3 Instructions for use............ 6 Safety Instructions..........6 2) Device usage............9 Appendix..............13 Technical p roblems & Solutions......15 Inspection & Maintenance.......... 15 Warranty.. -
Page 5: Overview
I. OVERVIEW: - The Little Giant Lifter Automatic ALG50A is designed to lift and move flat and heavier items like stone slabs etc. at workshops, ware houses, work sites, etc. - Clamp plates Opening and Closing mechanism is fully automatic. Each time you lift up and lift down, the installed Automatic locking latch will lock and release the clamping mechanism. -
Page 6: Dimensions
1) Dimensions: Length (A) Width (B) Height (C) inches (mm) inches (mm) inches (mm) ⁷⁄₁₆ ¹⁄₄ ¹⁄₈ (214) (184) (385) Grip Range (D) WLL* Net weight inches (mm) lbs (kg) lbs (kg) ³⁄₈ ¹⁵⁄₁₆ (10 ~ 50) 51.8 (23.5) 2860 (1300) WLL: Work load limit... -
Page 7: Spare Part List
2) S PARE PART LIST... - Page 8 SPARE PART LIST QTY. POS. DESCRIPTION CODE Allen bolt countersunk M16 x 50 ALG50A-01 Allen bolt countersunk M12 x 40 ALG50A-02 Clamp back plate ALG50A-03 Top pin ALG50A-04 Bottom pin ALG50A-05 Rubber tube ALG50A-06 Screw M4 x 20 ALG50A-07 Clamp center plate...
- Page 9 QTY. POS. CODE DESCRIPTION Brass washer 20 ALG50A-20 Ø Outer roller ALG50A-21 Shaft of roller ALG50A-22 Inner roller ALG50A-23 Receptacle (automatic lock) ALG50A-24 Main housing ALG50A-25 Allen bolt countersunk M8 x 40 ALG50A-26 Allen bolt countersunk M6 x 16 ALG50A-27...
-
Page 10: Instructions For Use
III. INSTRUCTIONS FOR USE: 1) Safety Instructions: WARNING: Before using your Little Giant Lifter Automatic, please confirm the surfaces of the slab to be lifted are flat, smooth, and free from dust, oil, or any kind of such harmful substances which allow slipping for lifting. a) For the Little Giant Lifter Automatic: Cautions: Carefully consider and follow all the safety regulations and... - Page 11 - Make sure to check the rubber pads are free from dirt. Grease and other substances that may reduce their effectiveness. Clean the rubber pad surfaces by water. Then wait till dry and use the device after. - Do not lift wet slabs. The grip depends on friction. Lifting wet slab may cause the rubber pads to lose their grips.
- Page 12 - If any part worn-out, replace with a new one or contact the manufacturer. - Before operating this device, check the swivel shackle that nuts are not loosened and cotter and snap pins are all in order. Be aware that Swivel Shackles can be worn-out time to time.
-
Page 13: Device Usage
c) Automatic locking latch system: - Automatic locking latch system consists of a cam wheel which could be rotated when the device was lifted up to clamp the stone slab. - Please mind that this Automatic Locking System engages Lifting pin with Main body to avoid Clamp plates to close for clamping. - Page 14 Step 1: Hook the Little Giant Lifter Automatic to a forklift boom or to a crane hook (figure 1.1). Warning: Place the device at a safe place, then crane hook or Forklift boom has to approach the lifter for installation. Avoid lifting the lifter by hands in order to avoid dropping the lifter unintentionally.
- Page 15 Step 3: Clamp the slab: - Lowering the lifter to be perpendicular to the slab and place at the center of the slab. (Figure 3.1) Note: Position the lifter securely at the center of the slab so that the load is balanced. Make sure that the slab is inserted in full depth to the opening of the lifter (Refer the Appendix, page 13) Slab center Equal spacing...
- Page 16 Step 4: Move the stone slab to the desired location (Figure 6.1). Warning: All the people who are not obligated must stand within safety area while slab is being lifted or moved. Do not allow yourself or anybody to go under the lifted slab. Clear the area for safe and firm operation...
-
Page 17: Appendix
V. APPENDIX: 1) Correct and incorrect methods of clamping slab: WARNING • Do not exceed W.L.L (Work Load Limit, page 2) • Slab thickness must be within G.R. (Grip Range, page 2) • Inspect and replace the Swivel Shackle as needed due to ware Examples: Correct and incorrect methods of clamping slab. - Page 18 2) SWIVEL SHACKLE: Length (A) Width (B) Height (C) Grip Range (D) Net weight inch (mm) inch (mm) inch (mm) inch (mm) lbs (kg) ¼ (133) ⅝ (42) 11 ¼ (286) 1 ¾ (45) 7.3 (3.3) - Step1: Check the wear of friction part. - Step 2: Lubricate Oil into friction surface once a week.
-
Page 19: Technical Problems & Solutions
V. TECHNICAL PROBLEMS & SOLUTIONS: Technical Solution Cause Image Problems Automatic Dust and/or Lubricate, clean locking latch Rust the locking latch does not operate The Lifting Lifting pin Clean the pin does not is stuck, or shafts, bearings return to the tension or replace the original... -
Page 20: Warranty
VII. WARRANTY: At the time of delivery, it is necessary to inspect the Little Giant Lifter Automatic to make sure that it has not been damaged during shipment. Any claims must be submitted within 8 days from the date of delivery. We provide a one (1) year warranty on the Little Giant Lifter Automatic from the date of purchase. -
Page 21: Warranty Certificate
WARRANTY CERTIFICATE You are kindly requested to read the following carefully. PERIOD The warranty starts from the date of purchase (date on distributors invoice). Warranty is valid for a period of twelve (12) months. WARRANTY This warranty is limited only to provide replacements of the parts recognized by the Company as defective (excluding worn outs and consumables.) The Company is not responsible for any misuse or abuse of... - Page 23 THIS MANUAL SHALL BE REVISED WITHOUT PRIOR NOTICE FOR IMPROVEMENT PURPOSES DO NOT COPY AND/OR QUOTE THE CONTENTS WITHOUT Copyright: PRIOR WRITTEN CONSENTS.