Using The Lcd Screen - Canon Ultura Instruction Manual

Using the LCD Screen

Switching between displays
E
When you open the LCD screen, it turns on. When you close it, the viewfinder
turns on instead. When the LCD screen is closed with its screen side facing up, the
LCD screen remains on.
Changing the angle of the LCD screen
You can choose the angle of the screen
that suits you best by opening and
rotating the screen, also you can rotate
the LCD screen so that faces in the
direction of the lens.
Notes:
• Avoid touching the LCD screen when
moving the LCD panel.
• Do not hold the camera by the LCD panel or the viewfinder.
• Make sure you open the LCD panel at 90°, before attempting to rotate it
backwards or forwards.
• Always rotate the LCD panel vertically into place, before closing it or pushing it
flat against the side of the camera.
• Always fully close the LCD panel until it clicks securely.
• Be careful not to leave the LCD, viewfinder or lens exposed to direct sunlight
outdoors or in a window. Doing so could cause damage.
• Bright light falling on the LCD screen may cause glare that makes it difficult for
you to view the image. In this case, switch to using the viewfinder.
About the LCD Viewfinder/Screen
The LCD screen built into this camcorder is a high precision product.
However, small black dots or bright points of light (red, blue or green) may appear
on the LCD screen. This is not a malfunction of the LCD screen and they are not
recorded on the tape. (Effective dots: more than 99.99%)
16