Caution phrases
The camcorder displays various caution phrases — they appear for 4 seconds
before disappearing.
Appears each time
you turn the power
on, until you set the
time zone, date and
time (
46).
Appears when the
battery pack is
exhausted
(
99).
Appears when the
tape has reached the
end.
Refer to p.17
Appears when,
during DV dubbing,
the DV cable is
disconnected or the
power of the digital
equipment connected
to the camcorder is
turned off. (MV500i
only)
Refer to p.104
Appears as a warning
to protect the tape and
also when
condensation is
detected. Remove the
tape as soon as
possible after the
camcorder has
displayed the caution.
Refer to p.80
Refer to p.80, p.81 or
p.83
Appears when you try
to do audio dubbing
or AV insert (MV500i
only) on a tape
recorded in LP mode
(
85, 88).
Appears when you try
to do audio dubbing
on a tape recorded in
16-bit audio or 12-bit,
4-channel mode
(
88).
Appears when the
camcorder detects a
blank section of a tape
during audio dubbing
or AV insert (MV500i
only) (
85, 88).
E
115