Aztec ULTRAGRIND Owner's Manual page 4

Propane concrete grinder and polisher
Table of Contents

Advertisement

PG. 4 ULTRAGRIND
Keep all objects clear of the exhaust system
during and after operation.
do not leave this machine unattended while the
engine is running.
do not operate equipment in one location for more
than a few seconds. damage to floor surface can
occur.
always store equipment
damage by falling objects in warehouse-type
areas. always store lpG tanks outside in a secure,
well-ventilated area.
the muffler and engine become hot enough
during operation to cause severe burns. these
parts remain hot for a long time after the machine
has been shut off. do not touch these parts until
they have cooled.
safety goggles, safety shoes and safety clothing
are recommended while operating the machine.
Continuous exposure to high noise levels can
cause hearing loss. Hearing protection must
be worn while the machine is in operation. the
operational weighted sound level of this machine
is less than 89dB(a). all noise area precautions
must be followed.
prolonged exposure to machine vibration may
cause tingling or numbness in the fingers and
hands. Use of gloves and limits to operator
vibration exposure are recommended to prevent
such symptoms.
vibration level of this machine is less than 2.5m/s
When lpG tank is attached to the machine and
not running, the operator should not leave the
machine unattended except for short periods of
time such as rest stops, washroom or meal stops.
the operator must completely understand all
instructions, warning and operating procedures
before using this machine.
this machine must be maintained in accordance
with this manual's recommended maintenance
instructions and the engine manufacturer's
recommended maintenance procedures. failure
to do so may cause damage to the machine,
equipment, furniture, buildings or personal
injury. a maintenance record should be kept
indicating date of service, hours on engine,
and work done.
away from possible
the operational hand/arm
Before attempting any maintenance procedures,
close the service valve on the fuel cylinder and
stop the engine.
if you smell propane odor, stop the engine, remove
the cylinder and take it outside for inspection.
exhaust parts are extremely Hot. do not allow
them to come into contact with anything or anyone.
do not attempt to change diamonds while the
engine is running.
do not stand on machine.
GUide to GRapHiCal symBols and
pRodUCt laBels
Read all instructions before using
Hot surface – Do Not Touch
Wear hearing protection when operating
Wear safety goggles when operating
Wear respiratory protection
Switch "On" Position
Switch "Off" position
Refer to page 13 of this manual for a location and
description of all safety labels and controls.
.
2
follow the instructions given in this booklet, the
engine's owners manual and the training given
by your supervisor for the safe operation of this
machine. failure to do so can result in personal
injury and/or damage to the machine or property.

Advertisement

Table of Contents
loading

Table of Contents