Respiratory Hazard Information - Aztec ULTRAGRIND Owner's Manual

PG. 2 ULTRAGRIND

RespiRatoRy HazaRd infoRmation:

Grinding/cutting/drilling of masonry, concrete, metal and other materials can generate dust,
mists and fumes containing chemicals known to cause serious or fatal injury or illness,
such as respiratory disease, cancer, birth defects or other reproductive harm. if you are
unfamiliar with the risks associated with the particular process and/or material being cut
or the composition of the tool being used, review the material safety data sheet and/or
consult your employer, the material manufacturer/supplier, governmental agencies such as
osHa, eU-osHa and niosH and other sources on hazardous materials. California and some
other authorities, for instance, have published lists of substances known to cause cancer,
reproductive toxicity, or other harmful effects.
Control dust, mist and fumes at the source where possible. in this regard use good work
practices and follow the recommendations of the manufacturers or suppliers, osHa, niosH,
and occupational and trade associations. Water should be used for dust suppression when
wet cutting is feasible. When the hazards from inhalation of dust, mists and fumes cannot be
eliminated, the operator and any bystanders should always wear a respirator that is approved
for the materials being used.
siliCosis WaRninG infoRmation:
Grinding/cutting/drilling of masonry, concrete, metal and other materials with silica in their
composition may give off dust or mists containing crystalline silica. silica is a basic component
of sand, quartz, brick clay, granite and numerous other minerals and rocks. Repeated and/
or substantial inhalation of airborne crystalline silica can cause serious or fatal respiratory
diseases, including silicosis. When using the equipment with such materials, always follow all
dust control and respiratory precautions.
Wear approved respiratory protection
when the machine is operating.