Installation - Cambridge SoundWorks Ambiance 602 User Manual

Installation

Conventional Plaster or
Drywall Ceilings
1. Decide roughly where to place the
speaker. Using a stud-finder (or
other means), locate any joists
near these locations. Adjust
speaker placement so the ceiling
cutout is not located directly below
a joist. Some speaker adjustment
is available within the cutout.
Use the supplied template to
outline the area to be cut. When
cutting into a ceiling, be careful
not to damage wiring, conduit,
or plumbing. A lath-and-plaster
or plaster skim-coat construction
ceiling is prone to spreading
cracks. To reduce cracking in
these ceilings, score the plaster
surface along the marked cut line
with a utility knife to a depth of at
least 1/8". Also, drill a 1/4" hole
before cutting. Make the cutout
using your preferred tool.
3
1
3
2
4
Completed Install