Finalizing Your Installation - Cambridge SoundWorks New Ensemble II Instructions Manual

Finalizing Your Installation

The New Ensemble II satellites can
be placed on a shelf, a mantel, or
anywhere convenient. Apply the
four small dome-shaped feet on the
bottom of each satellite. The feet
protect the supporting surface and
compensate for uneven or slick
conditions. If you ever need to
remove a foot, gently slide the edge
of a knife under one side and
slowly peel it off. If you attempt
to"pop" it off, you many damage
the speaker's finish.
The satellites may be hung
directly on a wall. Apply the dome
shaped feet to the back of the
satellite to insure a more secure
installation. Screw a No. 10 screw
into the wall so the head protrudes
3
about / inch. Plastic anchors may
8
be needed to secure the screws in
particularly hard or soft materials.
If so, drill the appropriate size holes
in the wall and tap in the anchors
until they are flush with the
surface. The exposed screw head
can then fit into the keyhole slot on
the rear of the New Ensemble II
satellite (see K). If necessary Adjust
the the space between the screw
head and the wall for the best fit.
Swivel brackets are also available
for hanging the speakers and
directing their sound towards the
listening area. Use the threaded
socket to attach these to the speakers
(see J). Ceiling brackets (L) are
available from Cambridge
SoundWorks and can be used for
hanging speakers where there are no
convenient locations for wall
mounting.
N
B Y
FOR USE WITH ENSEMBLE AND ENSEMBLE II
1-800-367-4434 USA
6 OHMS
J
N E
EW NSEMBLE II
B Y H E N R Y K L O S S
FOR USE WITH ENSEMBLE AND ENSEMBLE II
CAMBRIDGE SOUNDWORKS, INC.
NEWTON, MASSACHUSETTS USA
MADE IN TAIWAN
1-800-367-4434 USA 617-332-5936 (OUTSIDE USA)
00000
6 OHMS
E
EW NSEMBLE II ®
H E N R Y K L O S S
CAMBRIDGE SOUNDWORKS, INC.
NEWTON, MASSACHUSETTS USA
MADE IN TAIWAN
617-332-5936 (OUTSIDE USA)
00000
L
10
K
N E
EW NSEMBLE II
B Y H E N R Y K L O S S
FOR USE WITH ENSEMBLE AND ENSEMBLE II
CAMBRIDGE SOUNDWORKS, INC.
NEWTON, MASSACHUSETTS USA
MADE IN TAIWAN
1-800-367-4434 USA 617-332-5936 (OUTSIDE USA)
00000
6 OHMS