Multiple Timers; Hot Light Indicator - Monogram ZEU30 Owner's Manual

USING YOUR COOKTOP

MULTIPLE TIMERS

Timer Mode
For more information see Custom Settings, Timer Mode
section for Multi-Timer feature. Each burner can be linked to
a timer. Burner must be on to set the timer. When more than
one burner is on, the order of the timer is from left to right.
To Turn ON Multiple Timers
1. Touch the Timer Select pad. The corresponding burner
power level and the display will blink. Touch the Ʌ or V
arrows to adjust time. Timer automatically starts after 3
seconds if there is no further action. The "ON" LED will
light when timer is on.

HOT LIGHT INDICATOR

A hot surface indicator light (one for each cooking element)
will glow when the glass surface is hot and will remain on
until the surface has cooled to a temperature that is safe to
touch.
49-80825 Rev. 2
Burner
Power Level
2. To set timer for the next burner, touch the Timer Select
pad. The corresponding burner power level and the
display will blink. Touch the Ʌ or V arrows to adjust time.
Timer automatically starts after 3 seconds if there is no
further action. The "ON" LED will light when timer is on.
Repeat the steps for the remaining timers.
To Turn OFF Multiple Timers
Hold Timer Select pad for 3 seconds to cancel timer. The
corresponding burner power level and display will blink. When
the burner times out, the corresponding timer also times out.
Display
Hot Surface Indicator Light
13