Larger Systems - Cambridge Audio AS10 Installation Manual

LARGER SYSTEMS

CK10
couplers
Connections b b etween A A H10 a a nd V V H10 t t o a a llow e e ight m m ain z z ones a a nd e e ight
sub-z z ones
Cat-5 patch cable
CK10
couplers
Cat-5 patch cable
Incognito multi-room
Linking U U nits
For large installations which require more than four main zones and
four sub-zones, an AH10 'linking' facility is provided. Units are linked
via a Cat-5e patch cable to the 'Hub Link' in and out sockets on the
top right hand corner of each AH10.
In order to share audio input sources with the first AH10, the second
may be joined using Incognito CK10 audio couplers (see diagram).
These double-ended phono plugs simply connect the 'Loop out'
sockets of the first AH10, to the 'Audio input' sockets of the second,
allowing both to access the same sources and distribute them to all
available zones.
Up to four AH10s may be linked together in this way, providing audio
for a maximum of 16 main zones for the AH10, or 16 main zones
and 16 sub-zones for the AH10.
VH10 L L inking
Should video also be required in more than the four main zones and four
sub-zones provided by the VH10, then these units may also be linked.
Each VH10 must be connected to a corresponding AH10 via the Cat-5e
patch cable, in order to provide power and switching commands.
Video input sources may then be shared between both VH10 units
by using Incognito CK10 couplers (See diagram). These double-
ended phono plugs simply connect the 'Loop out' sockets of the first
VH10 to the 'Video input' sockets of the second, allowing both to
access the same sources and distribute them to all available zones.
Up to four VH10s may be linked together with the corresponding
four AH10s in this way, providing video for a maximum of 16 main
zones for the AH10.
Incognito multi-room 13