l
If you wish to select a timed drying
programme,
press
SELECTION button until the required
time indicator lights up.
By
selecting
programme, it's not possible to select
a degree of dryness different from the
default one.
l
The washer dryer will calculate the time
needed for drying and the level of
moisture
remaining
according to the load and drying type
selected.
l
Check that the tap is turned on and that
the
discharge
correctly.
WARNING:
Do
not
dry
articles
padding (e.g. quilts, quilted anoraks,
etc.) and very delicate fabrics.
If garments are drip/dry, load less
items to prevent creasing.
l
Press the START/PAUSE button (the
display
will
show
remaining).
The appliance calculates the time to
the end of the selected programme
based upon a standard loading.
During
the
cycle,
corrects the time according to the size
and composition of the load.
During the drying phase the drum will
accelerate to a higher speed to
distribute the load and to optimize the
drying performance.
the
DRYING
the
wool
drying
in
the
laundry,
hose
is
positioned
with
special
the
drying
time
the
appliance
l
The drying programme indicator will be
on, until the cool down phase begins and
the corresponding indicator is on.
l
When the programme is finished the word
"End" will appear on the display. After
5 minutes the appliance will go into
standby mode (on certain models, the
display will show two lines).
l
Switch off the machine by turning the
programme selector to the OFF position.
l
Open the door and remove the laundry.
l
Turn off the tap.
CANCELLING THE DRYING PROGRAMME
l
To cancel the drying programme, press
and hold the DRYING SELECTION
button for about 3 seconds.
WARNING:
After cancelling the drying programme,
the cool down phase will begin and you
must wait for about 10/20 minutes
before opening the door.
In order to ensure the correct operation
of the appliance, it is advisable not to
interrupt the drying phase unless it is
absolutely necessary.
29