Vax U86-AL-B Manual page 8

Getting started
Assembling your vacuum cleaner
IMPORTANT: The motor is contained in the dirt container lid, always make sure the pre-motor filter is correctly fitted before
using the vacuum cleaner. Loss of suction may be experienced if the filter insert is not removed before use.
Press the dirt container
release button. Lift and
remove the dirt container
off the vacuum cleaner.
Turn the dirt container lid
anti-clockwise, lift and remove
lid from dirt container.
Push the handle into
the body of the vacuum
cleaner. The handle will
click into position when
correctly fitted.
Using your Air Cordless
IMPORTANT: The brushbar should be ON for carpets and OFF or hard floors.
Press the On/Off button
to turn the vacuum
cleaner on.
The filter insert is attached
to the pre-motor filter under
the dirt container lid. Pull
and remove the filter insert.
Fit the battery onto the vacuum
cleaner (below the dirt container).
The battery will click into position
when correctly fitted.
Place your foot on the
base and pull the handle
backwards to recline.
Make sure the tab on the
pre-motor filter is visible
when re-fitting the
pre-motor filter into
the dirt container lid.
Press the brushbar button to
activate the brushbar.
Replace the dirt container lid,
on to the dirt container and
place the dirt container on to
the main body of the machine.
TIP
Stand the vacuum cleaner
in the upright position to
use the hose.