Express Configuration Wizard Tray Tool - ADTRAN XR Quick Start Manual

Chapter 2. Installation

Express Configuration Wizard Tray Tool

The Tray Tool is used for quick access to the Express Configura-
tion Wizard and to enable or disable the external analog modem
when used with an Express XRT.
The Express Configuration Wizard Tray Tool is provided only with the
Windows 95 and Windows NT 4.0 versions of the Express Configura-
tion Wizard.
To enable the Express Configuration Wizard Tray Tool, use the
following procedure:
1. Run the Express Configuration Wizard. See the section
Using the Express Configuration Wizard.
2. Close the Express Configuration Wizard.
3. Once the Express Configuration Wizard is closed, the
Windows 95 or Windows NT 4.0 taskbar will have a new
icon in the Tray Tool. Figure 2-7 illustrates the new taskbar
with the new icon in the Tray Tool.
1 8
Express Configuration Wizard Tray Tool
Express XR/XRT Quick Start Guide
Figure 2-7
61200.153L1-13