Fault Rectification - Workzone GT-DC-02 Manual

• Avoid contact with eyes or skin. Immediately rinse areas
affected by the battery acid with plenty of clean water and seek
medical advice.
• Remove the batteries from the device in the case of longer
periods of disuse.
Battery disposal
• Batteries and rechargeable batteries are not permitted to be
disposed of with household waste!
• Every consumer is legally obligated to submit batteries and
rechargeable batteries to the collection centre of his local
authority, district or to retailers. All batteries and rechargeable
batteries can thereby be disposed of in an environmentally
friendly manner.
Batteries and rechargeable batteries containing harmful
substances are identified with this symbol and with
chemical symbols (Cd for cadmium, Hg for mercury, Pb
for lead).
10
AFTER SALES SUPPORT 0800 / 328 6020
00800 / 4467 5888
GT-DC-02, 02/13, E45316
info@dariolondon.com AFTER SALES SUPPORT

Fault rectification

Fault Possible cause
Flashing display Low voltage
No display 1. Low voltage
2. Loose connection
Frozen or flashing Random fault in
display the circuit
CAUTION:
In the event of an electrostatic discharge on the housing, the
display can reset or an incorrect value can be displayed. In this
case, the measurement must be repeated. For this, switch the
device off and on once and carry out the zeroing by pressing the
zero gauge (ZERO) key.
11
0800 / 328 6020
00800 / 4467 5888
GT-DC-02, 02/13, E45316
Solution
Replace batteries
1. Replace batteries
2. Readjust battery
Remove battery
and reinsert again
after one minute
info@dariolondon.com