Peachtree preDAC Manual page 14

NODE 2i users: You can learn these IR commands into the BluOS application so
they will control the Bluesound NODE 2i.
H USB-B Button: This button selects the USB-B input and lights the LED blue (or
green if the volume bypass mode is engaged - please see the volume control
bypass instructions on page 17 for more details). Caution: the volume control in
the preDAC is completely bypassed in the volume control bypass mode!
I USB-A Button: This button selects the USB-A input and lights the LED blue (or
green if the volume bypass mode is engaged - please see the volume control
bypass instructions on page 17 for more details). Caution: the volume control in
the preDAC is completely bypassed in the volume control bypass mode!
J COAX Button: This button selects the COAX input and lights the LED blue (or
green if the volume bypass mode is engaged - please see the volume control
bypass instructions on page 17 for more details). Caution: the volume control in
the preDAC is completely bypassed in the volume control bypass mode!
K OPT-1 & OPT-2 Button: These buttons select the OPT-1 and OPT-2 inputs and
light the LED blue (or green if the volume bypass mode is engaged - please see
the volume control bypass instructions on page 17 for more details). Caution:
the volume control in the preDAC is completely bypassed in the volume control
bypass mode!
L AUX-1/HTB Button: This button selects the AUX-1 input and lights the LED blue
(or green if the Home Theater Bypass mode is engaged - please see the Home
Theater Bypass instructions on page 16 for more details). Caution: the volume
control in the preDAC is completely bypassed in the Home Theater Bypass mode!
M AUX-2/PHONO Button: This button selects the AUX-2 input and lights the LED
blue (or green if the PHONO input mode is engaged). PHONO input mode is
designed to integrate the preDAC with a Moving Magnet (MM) phonograph/
turntable. Note: When in PHONO input mode, the input has additional gain and
equalization settings applied that are specifically designed for MM cartridges.
Please note that when using a phonograph/turntable with a Moving Coil (MC)
cartridge, this input should be set to AUX-2 and an external phono preamp
designed specifically for Moving Coil cartridges used. Press and hold this button
for ~10 seconds to activate the PHONO (green LED) input mode. Press and hold
this button for ~5 seconds to deactivate the PHONO input mode (blue LED).
N LOOP Button: Engages and disengages the LOOP OUTPUT/LOOP INPUT. Note:
The LOOP Button LED on the front panel is lit blue whenever the loop is engaged.
O PRESET Buttons 1-8: These buttons select PRESETS 1-8 in the optional
Bluesound NODE 2i.
14