Remote Control - Peachtree preDAC Manual

B
D
E
G
H
K
O
E DIM Button: Dims the front panel LED brightness. Note: the brightness will
continually cycle through all of the available settings: maximum, high, medium,
low, maximum, high...
F Asterik Button: Adjusts the LED brightness of the optional Bluesound NODE 2i
audio streaming device.
G Transport Control Buttons: Controls playback of compatible devices connected
to a USB input (USB-A for iOS devices and USB-B for personal computers).
selects the previous track or the beginning of the current track if playback is in
progress.
   
next song in the current track queue or list. Please note that some USB capable
devices and applications may not support these controls. This is not a malfunction
of the remote control. If the USB device does not respond to these commands, it is
because the connected device or application does not support them. Bluesound

REMOTE CONTROL

C
F
I
J
L
M
N
toggles between play mode and pause mode.
B On/Standby Button: With the AC power
cord connected and the rear panel POWER
switch set to ON, this button toggles the
unit between On mode (which selects
the last input used) and Standby mode
which lights the LED red. Note: it takes ~2
seconds for the unit to fully transition from
standby to on mode. During this time, any
commands will not be acknowledged.
C Mute Button: Mutes and un-mutes the
RIGHT & LEFT Speaker, PREAMP and
headphone (front panel) outputs. Note: the
currently selected blue or green input LED
will flash slowly while the unit is muted.
D Volume +/-: Increases and decreases
the output level. Note: the volume level
will be indicated for ~2 seconds using
the 8 blue input LEDS on the front panel.
Note: the currently selected blue or green
input LED will flash slowly while the unit is
muted. Whenever the preDAC is making
output level changes automatically, the
input LEDs will blink. The blinking stops
when the preDAC reaches the correct
output level. This occurs when mute is
disengaged, volume control bypass is
selected and or home theater bypass is
selected. This is to minimize the chance of
sudden, unexpected output level changes.
 
selects the
 
13