Kohler TOUCHLESS K-13686 Installation Instructions

1. BEFORE YOU BEGIN
HOW TO USE THESE INSTRUCTIONS
These instructions contain important information on the
Touchless battery urinal flush valve which is designed to
work in place of an existing manual flush valve. No addi-
tional plumbing or electrical connections are required to
install the valve.
2. INSTALLATION SEQUENCE
Remove cover from water supply valve. Using a screw-
driver, turn the screw clockwise to close valve.
Activate flush lever to drain water from flush valve assem-
bly.
Loosen inlet and outlet nuts and remove manual flush
valve assembly.
Clean threads on water supply valve. Install by inserting
flush valve inlet fitting into water supply valve, and then lin-
ing up outlet fitting with vacuum breaker unit. Tighten inlet
and outlet connections securely.
NOTE: Make sure O-ring is on inlet fitting.
AB
113351-2-
R
TOUCHLESS
URINAL FLUSH VALVE
Flush Valve
Flush Lever
Vacuum Breaker
Outlet
BATTERY
K-13686
Water Supply
Valve
Cover
Turn Clockwise
to Close Valve
Loosen Nuts
to Remove
Existing Valve
O-Ring
Water
Supply
Inlet
Valve